PartsTable
Technical Data Sheet
Download PDF

77C707390P001 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

77C707390P001: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, overall_width: 7.200 INCHES NOMINAL IN, aperture_width: 4.800 INCHES NOMINAL IN, overall_length: 18.000 INCHES NOMINAL IN, aperture_length: 16.000 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-313-9357, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
77C707390P001
NSN: 5330-01-313-9357
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
overall_width7.200 INCHES NOMINAL IN
aperture_width4.800 INCHES NOMINAL IN
overall_length18.000 INCHES NOMINAL IN
aperture_length16.000 INCHES NOMINAL IN
special_features4 DIFFERENT SIZED BOLT HOLES 9 HOLES 0.440 IN. DIA; 4 HOLES 0.380 IN. DIA; 2 HOLES 0.840 IN. DIA; 1 HOLE 0.500 IN. DIA; APERTURE IS IRREGULARLY SHAPED IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D1056 SBE7 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-STD 670 SBE7 MIL STD SINGLE MATERIAL RESPONSE OVERALL
outside_edge_to_bolt_hole_center_distance_along_length0.500 INCHES NOMINAL IN
outside_edge_to_inside_edge_smallest_distance_along_length1.000 INCHES NOMINAL IN
NSN5330-01-313-9357
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 77C707390P001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D1056 SBE7 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-STD 670 SBE7 MIL STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 4.800 INCHES NOMINAL IN
•
APERTURE LENGTH: 16.000 INCHES NOMINAL IN
•
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D1056 SBE7 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-STD 670 SBE7 MIL STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH18.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH7.200 INCHES NOMINAL IN
APERTURE WIDTH4.800 INCHES NOMINAL IN
APERTURE LENGTH16.000 INCHES NOMINAL IN
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH1.000 INCHES NOMINAL IN
SPECIAL FEATURES4 DIFFERENT SIZED BOLT HOLES 9 HOLES 0.440 IN. DIA; 4 HOLES 0.380 IN. DIA; 2 HOLES 0.840 IN. DIA; 1 HOLE 0.500 IN. DIA; APERTURE IS IRREGULARLY SHAPED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 77C707390P001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 77C707390P001?
77C707390P001 is a GASKET.
What is the NSN for 77C707390P001?
77C707390P001 is cataloged in the U.S. Government catalog under NSN 5330-01-313-9357. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 77C707390P001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.