779P — CONNECTOR,PLUG,ELECTRICAL

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

779P: CONNECTOR,PLUG,ELECTRICAL.

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: OIL LUBRICATING LUBRICATION, corner_shape: SQUARE INSIDE RIGHT CORNER, flange_width: 0.3750 INCHES NOMINAL IN, overall_length: 3.0000 INCHES NOMINAL IN, special_features: 4 HOLES 0.4375 IN. DIA.ON 2.7500 IN.

DIA. BOLT CIRCLE DRILLED THRU FLANGE IN, style_designator: SOLID, EXTERNAL FLANGE ONE END. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-218-3481, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

779P

NSN: 3120-00-218-3481
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 0UBG9 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DIV EPD (USA)

SPECIFICATIONS

material	OIL LUBRICATING LUBRICATION
corner_shape	SQUARE INSIDE RIGHT CORNER
flange_width	0.3750 INCHES NOMINAL IN
overall_length	3.0000 INCHES NOMINAL IN
special_features	4 HOLES 0.4375 IN. DIA.ON 2.7500 IN. DIA. BOLT CIRCLE DRILLED THRU FLANGE IN
style_designator	SOLID, EXTERNAL FLANGE ONE END
body_inside_diameter	1.1250 INCHES MINIMUM AND 1.1270 INCHES MAXIMUM IN
body_outside_diameter	1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
flange_outside_diameter	3.4900 INCHES MINIMUM AND 3.5100 INCHES MAXIMUM IN
lubricant_accommodation_style	GROOVED OPEN BOTH ENDS
surface_groove_location_and_quantity	2 INTERNAL
antirotation/lubrication_type_and_quantity	2 HOLE
NSN	3120-00-218-3481

COMPONENT DIAGRAM

KEY FEATURES

•

CORNER SHAPE: SQUARE INSIDE RIGHT CORNER

•

FLANGE OUTSIDE DIAMETER: 3.4900 INCHES MINIMUM AND 3.5100 INCHES MAXIMUM IN

•

BODY OUTSIDE DIAMETER: 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE BODY CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	CHAMFERED OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER	3.4900 INCHES MINIMUM AND 3.5100 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER	1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
OVERALL LENGTH	3.0000 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

255277-2Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

SL5277PC18Reference document

Same NSN cross-reference

Reference document — Secondary reference

SL5276PC18Reference document

Same NSN cross-reference

Reference document — Secondary reference

40843Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 779P?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 779P?

779P is a CONNECTOR,PLUG,ELECTRICAL.

What parts can replace 779P?

There are 4 known substitutes for 779P: 255277-2, SL5277PC18, SL5276PC18 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 779P?

779P is cataloged in the U.S. Government catalog under NSN 3120-00-218-3481. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

779P — CONNECTOR,PLUG,ELECTRICAL

Request a Quote — 779P