PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 777S1-1-2
777S1-1-2 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include body_width: 1.800 INCHES MAXIMUM IN, body_height: 2.100 INCHES MAXIMUM IN, body_length: 1.620 INCHES NOMINAL IN, inclosure_type: FULLY INCLOSED, overall_length: 2.400 INCHES MAXIMUM IN, usage_location: EITHER ARM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-705-6951, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
777S1-1-2
NSN: 4730-00-705-6951
FSC: 4730
CAGE: 79227 — WATTS REGULATOR COMPANY (USA)
SPECIFICATIONS
body_width1.800 INCHES MAXIMUM IN
body_height2.100 INCHES MAXIMUM IN
body_length1.620 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_length2.400 INCHES MAXIMUM IN
usage_locationEITHER ARM
mounting_methodFLANGE AND UNTHREADED HOLE(S) SINGLE GROUP
frequency_rating50.0 HERTZ MINIMUM AND 420.0 HERTZ MAXIMUM SINGLE COMPONENT
size_designationMEDIUM
special_featuresELASTIC;MEN'S TYPE;30-36 INS. CHEST;VELCRO CLOSURE;WASHABLE;IMMOBILIZES SHOULDER/UPPER PART OF ARM;SURGICAL OR NONSURGICAL INJURIES;STRAINS;MUSCULAR SPRAINS AND CAST REMOVAL
features_providedADJUSTABLE
winding_power_rating1.7 VOLTS-AMPERES SINGLE COMPONENT SECOND SECONDARY
NSN4730-00-705-6951
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 777S1-1-2 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
351112Interchangeable
interchangeable cross-reference
interchangeable
456001Interchangeable
interchangeable cross-reference
interchangeable
SM-B-875042Interchangeable
interchangeable cross-reference
interchangeable
79-84035Interchangeable
interchangeable cross-reference
interchangeable
58-6017PC46Interchangeable
interchangeable cross-reference
interchangeable
58-5725 IT63Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 777S1-1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 777S1-1-2?
777S1-1-2 is a RESISTOR,FIXED,WIRE WOUND.
What parts can replace 777S1-1-2?
There are 9 known substitutes for 777S1-1-2: 351112, 456001, SM-B-875042 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 777S1-1-2?
777S1-1-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-705-6951. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 777S1-1-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026