PartsTable
Technical Data Sheet
Download PDF

7767800 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7767800: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1141 OVERALL, rim_surface_width: 0.445 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN, peripheral_diameter: 11.875 INCHES NOMINAL IN, center_hole_diameter: 7.750 INCHES NOMINAL IN, cross-sectional_height: 8.870 INCHES NOMINAL IN, cross-sectional_thickness: 0.377 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-776-7800, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7767800
NSN: 5330-00-776-7800
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1141 OVERALL
rim_surface_width0.445 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
peripheral_diameter11.875 INCHES NOMINAL IN
center_hole_diameter7.750 INCHES NOMINAL IN
cross-sectional_height8.870 INCHES NOMINAL IN
end_item_identification5420-00-889-2020 CHASSIS,AVLB;2350-01-058-9487 M60A1 W/STABILIZER;2350-00-582-5595 TANK,COMBAT;2350-01-059-1503 TANK,M60A1,PASSIVE;2350-00-756-8497TANK,COMBAT;2350-00-678-5573 TANK,COMBAT
cross-sectional_thickness0.377 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
cross-sectional_shape_styleFLANGE
NSN5330-00-776-7800
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7767800 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.377 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 8.870 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.445 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: FLANGE
•
PERIPHERAL DIAMETER: 11.875 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 7.750 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1141 OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.377 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT8.870 INCHES NOMINAL IN
RIM SURFACE WIDTH0.445 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEFLANGE
PERIPHERAL DIAMETER11.875 INCHES NOMINAL IN
CENTER HOLE DIAMETER7.750 INCHES NOMINAL IN
END ITEM IDENTIFICATION5420-00-889-2020 CHASSIS,AVLB;2350-01-058-9487 M60A1 W/STABILIZER;2350-00-582-5595 TANK,COMBAT;2350-01-059-1503 TANK,M60A1,PASSIVE;2350-00-756-8497TANK,COMBAT;2350-00-678-5573 TANK,COMBAT
MATERIALSTEEL COMP 1141 OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
5330007767800Reference document
Same NSN cross-reference
Reference document — Secondary reference
6762094Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7767800?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7767800?
7767800 is a RETAINER,PACKING.
What parts can replace 7767800?
There are 2 known substitutes for 7767800: 5330007767800, 6762094. Substitute compatibility should be verified for your specific system.
What is the NSN for 7767800?
7767800 is cataloged in the U.S. Government catalog under NSN 5330-00-776-7800. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7767800