The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.281 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR OR PLASTIC CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: END OF TONGUES HAVE 3/8 IN. END RADIUS IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED.
This part is cataloged in the U.S. Government catalog under NSN 5340-00-775-5399, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
7755399
NSN:5340-00-775-5399 FSC:5340 — Hardware, Commercial CAGE:19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter
0.281 INCHES NOMINAL IN
material
RUBBER CHLOROPRENE CLASS CR OR PLASTIC CUSHION
overall_width
0.500 INCHES NOMINAL IN
special_features
END OF TONGUES HAVE 3/8 IN. END RADIUS IN
style_designator
SINGLE LOOP
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
CADMIUM AND CHROMATE OR ZINC AND CHROMATE BAND
material_thickness
0.051 INCHES NOMINAL IN
loop_inside_diameter
1.250 INCHES NOMINAL IN
cushioning_environmental_protection
OIL RESISTANT AND HEAT
material_document_and_classification
ASTM D2000 GRADE 2BC515F1 ASSN STD 1ST MATERIAL RESPONSE OR MIL-I-631 TY F FORM U GRADE B CL 1 CATEGORY 1 MIL SPEC 2ND MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end
1.343 INCHES NOMINAL IN
NSN
5340-00-775-5399
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY 2 CL 2 FED SPEC 2ND TREATMENT RESPONSE BAND
•
CUSHIONING ENVIRONMENTAL PROTECTION: OIL RESISTANT AND HEAT
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 GRADE 2BC515F1 ASSN STD 1ST MATERIAL RESPONSE OR MIL-I-631 TY F FORM U GRADE B CL 1 CATEGORY 1 MIL SPEC 2ND MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.281 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.343 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416 TY 2 CL 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY 2 CL 2 FED SPEC 2ND TREATMENT RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTION
OIL RESISTANT AND HEAT
STYLE DESIGNATOR
SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM D2000 GRADE 2BC515F1 ASSN STD 1ST MATERIAL RESPONSE OR MIL-I-631 TY F FORM U GRADE B CL 1 CATEGORY 1 MIL SPEC 2ND MATERIAL RESPONSE CUSHION
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7755399?
7755399 is a CLAMP,LOOP.
What parts can replace 7755399?
There are 2 known substitutes for 7755399: 7057332, 5340007755399. Substitute compatibility should be verified for your specific system.
What is the NSN for 7755399?
7755399 is cataloged in the U.S. Government catalog under NSN 5340-00-775-5399. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.