PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7737597
7737597 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 9.250 INCHES NOMINAL IN, aperture_width: 7.750 INCHES NOMINAL IN, overall_length: 15.625 INCHES NOMINAL IN, aperture_length: 14.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-693-3513, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7737597
NSN: 5330-00-693-3513
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
hole_diameter0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width9.250 INCHES NOMINAL IN
aperture_width7.750 INCHES NOMINAL IN
overall_length15.625 INCHES NOMINAL IN
aperture_length14.125 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
bolt_hole_quantity16
inside_corner_radius0.625 INCHES NOMINAL IN
bearing_surface_width0.750 INCHES NOMINAL IN
outside_corner_radius1.312 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
NSN5330-00-693-3513
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7737597 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE LENGTH: 14.125 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+1141-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
BEARING SURFACE WIDTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH9.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.250 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
APERTURE LENGTH14.125 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,+1141-A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
BEARING SURFACE WIDTH0.750 INCHES NOMINAL IN
APERTURE WIDTH7.750 INCHES NOMINAL IN
OVERALL LENGTH15.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
3004785Interchangeable
interchangeable cross-reference
interchangeable
313366Interchangeable
interchangeable cross-reference
interchangeable
3024651-6Interchangeable
interchangeable cross-reference
interchangeable
1-189-FInterchangeable
interchangeable cross-reference
interchangeable
481250Interchangeable
interchangeable cross-reference
interchangeable
48120Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7737597?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7737597?
7737597 is a GASKET.
What parts can replace 7737597?
There are 10 known substitutes for 7737597: 3004785, 313366, 3024651-6 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7737597?
7737597 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-693-3513. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7737597

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026