The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, length: 0.102 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.067 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN, overall_height: 0.405 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-964-6799, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
7735497-12
NSN:5340-00-964-6799 FSC:5340 — Hardware, Commercial CAGE:99971 — LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS (USA)
SPECIFICATIONS
width
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
length
0.102 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
material
COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
hole_diameter
0.067 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
overall_height
0.405 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.013 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
loop/holding_dimension
0.715 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.210 INCHES NOMINAL IN
material_document_and_classification
QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN
5340-00-964-6799
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.102 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 0.715 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.013 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.210 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
WIDTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.405 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
LENGTH
0.102 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION
0.715 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.013 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END
0.210 INCHES NOMINAL IN
SURFACE TREATMENT
CADMIUM AND CHROMATE OVERALL
WIDTH
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL
COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
HOLE DIAMETER
0.067 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7735497-12?
7735497-12 is a CLIP,SPRING TENSION.
What parts can replace 7735497-12?
There are 2 known substitutes for 7735497-12: 499496, 6156-8C. Substitute compatibility should be verified for your specific system.
What is the NSN for 7735497-12?
7735497-12 is cataloged in the U.S. Government catalog under NSN 5340-00-964-6799. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.