PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 773-10
773-10 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The OSCILLATOR,CRYSTAL CONTROLLED is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, body_style: ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE, bore_shape: STRAIGHT, head_style: HEXAGON, head_height: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN, power_rating: 2.0 WATTS AVERAGE AND 300.0 WATTS PEAK. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6745, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
773-10
NSN: 3110-00-155-6745
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
body_styleROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
bore_shapeSTRAIGHT
head_styleHEXAGON
head_height0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
power_rating2.0 WATTS AVERAGE AND 300.0 WATTS PEAK
thread_class2A A
bore_diameter50.00 MILLIMETERS NOMINAL MM
overall_width27.0 MILLIMETERS NOMINAL MM
thread_length1.670 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSED
load_directionRADIAL
NSN3110-00-155-6745
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 773-10 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 110.00 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL BALL
•
SHIELD QUANTITY: 2
•
LUBRICATION MATERIAL: GREASE
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER110.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL BALL
SHIELD QUANTITY2
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
R94-0049-010Interchangeable
interchangeable cross-reference
interchangeable
773-10Interchangeable
interchangeable cross-reference
interchangeable
318-200-902Interchangeable
interchangeable cross-reference
interchangeable
5083FInterchangeable
interchangeable cross-reference
interchangeable
57310Interchangeable
interchangeable cross-reference
interchangeable
K-8LInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 773-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 773-10?
773-10 is a OSCILLATOR,CRYSTAL CONTROLLED.
What parts can replace 773-10?
There are 27 known substitutes for 773-10: R94-0049-010, 773-10, 318-200-902 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 773-10?
773-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6745. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 773-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026