PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7727PC10
7727PC10 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, exterior_color: BLACK, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-033-2098, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7727PC10
NSN: 4720-01-033-2098
FSC: 4720
CAGE: 04953 — EDO AIL SYSTEMS INC (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
exterior_colorBLACK
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.250 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.530 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
features_providedNONSKIVE AND REUSABLE END FITTINGS
operating_pressure2750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure11000.0 POUNDS PER SQUARE INCH LBS
NSN4720-01-033-2098
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 7727PC10 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER COVERING ENVIRONMENTAL PROTECTION: ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES IN
•
THREAD SERIES DESIGNATOR: UNF FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
BURST TEST PRESSURE: 11000.0 POUNDS PER SQUARE INCH LBS
•
THREAD CLASS: 3B FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
INSIDE DIAMETER0.250 INCHES NOMINAL IN
MINIMUM INSIDE BENDING RADIUS4.000 INCHES IN
THREAD SERIES DESIGNATORUNF FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
BURST TEST PRESSURE11000.0 POUNDS PER SQUARE INCH LBS
THREAD CLASS3B FIRST END
THREAD DIRECTIONRIGHT-HAND FIRST END
MEASURING METHOD AND LENGTH79.000 INCHES NOMINAL OVERALL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
407FInterchangeable
interchangeable cross-reference
interchangeable
319687-305Interchangeable
interchangeable cross-reference
interchangeable
407SFInterchangeable
interchangeable cross-reference
interchangeable
7529Interchangeable
interchangeable cross-reference
interchangeable
3377222Interchangeable
interchangeable cross-reference
interchangeable
7707Interchangeable
IBM 1700W AC Power Supply
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7727PC10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7727PC10?
7727PC10 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 7727PC10?
There are 23 known substitutes for 7727PC10: 407F, 319687-305, 407SF and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7727PC10?
7727PC10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-033-2098. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7727PC10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026