PartsTable
Technical Data Sheet

772142-1 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

INSULATION SLEEVING,ELECTRICAL,S. Key specifications include material: PLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED, case_style: SQUARE, seal_width: 0.406 INCHES NOMINAL IN, flexibility: SEMIRIGID, temp_rating: -55.0 CELSIUS DEGC, style_designator: BOOT-STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5330-00-772-1421, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
772142-1
NSN: 5330-00-772-1421
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED
case_styleSQUARE
seal_width0.406 INCHES NOMINAL IN
flexibilitySEMIRIGID
temp_rating-55.0 CELSIUS DEGC
style_designatorBOOT-STRAIGHT
housing_bore_diameter4.125 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
sealing_element_styleANGULAR
environmental_protectionCORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT
main_body_overall_length1.120 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
main_body_wall_thickness0.040 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY IN
NSN5330-00-772-1421
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 772142-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 4.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.406 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 2.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER4.125 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.406 INCHES NOMINAL IN
CASE STYLESQUARE
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER2.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
5M250-8InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
GB860AA-1-3InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
407344InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
34-5877InterchangeableGOVERNMENT REGISTRY
Insulation Sleeving,electrical,s
interchangeable
4-407344InterchangeableGOVERNMENT REGISTRY
Insulation Sleeving,electrical,s
interchangeable
664-006-9001InterchangeableGOVERNMENT REGISTRY
Insulation Sleeving,electrical,s
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 772142-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 772142-1?
772142-1 is a INSULATION SLEEVING,ELECTRICAL,S.
What parts can replace 772142-1?
There are 11 known substitutes for 772142-1: 5M250-8, GB860AA-1-3, 407344 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 772142-1?
772142-1 is cataloged in the Federal Logistics Information System under NSN 5330-00-772-1421. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 772142-1