PartsTable
Technical Data Sheet
Download PDF

7714911 — NUT,PLAIN,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7714911: NUT,PLAIN,SLOTTED,HEXAGON.

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 5145 OR STEEL COMP 8640 OR STEEL COMP 8740 OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 2.188 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UN, hardness_rating: 269.0 BRINELL STANDARD MINIMUM AND 321.0 BRINELL STANDARD MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-771-4911, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7714911
NSN: 5310-00-771-4911
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP 5145 OR STEEL COMP 8640 OR STEEL COMP 8740 OVERALL
nut_styleSLOTTED, HEXAGON
nut_height2.188 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
thread_class2B
thread_seriesUN
hardness_rating269.0 BRINELL STANDARD MINIMUM AND 321.0 BRINELL STANDARD MAXIMUM
thread_directionRIGHT-HAND
countersink_angle89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM NUT
surface_treatmentZINC AND CHROMATE OVERALL
width_across_flats3.188 INCHES MINIMUM AND 3.250 INCHES MAXIMUM IN
nominal_thread_size2.250 INCHES IN
bearing_surface_typeWASHER FACED
NSN5310-00-771-4911
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7714911 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 3.188 INCHES MINIMUM AND 3.250 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2, SC3 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UN
•
HARDNESS RATING: 269.0 BRINELL STANDARD MINIMUM AND 321.0 BRINELL STANDARD MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A322 ASSN STD ALL MATERIAL RESPONSES OR ASTM A331 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 2.250 INCHES IN
•
NUT HEIGHT: 2.188 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS3.188 INCHES MINIMUM AND 3.250 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 TY 2, SC3 MIL STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUN
HARDNESS RATING269.0 BRINELL STANDARD MINIMUM AND 321.0 BRINELL STANDARD MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A322 ASSN STD ALL MATERIAL RESPONSES OR ASTM A331 ASSN STD ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE2.250 INCHES IN
NUT HEIGHT2.188 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
SURFACE TREATMENTZINC AND CHROMATE OVERALL
COUNTERSINK ANGLE89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM NUT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
KC7532Reference document
Same NSN cross-reference
Reference document — Secondary reference
780Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310007714911Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7714911?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7714911?
7714911 is a NUT,PLAIN,SLOTTED,HEXAGON.
What parts can replace 7714911?
There are 3 known substitutes for 7714911: KC7532, 780, 5310007714911. Substitute compatibility should be verified for your specific system.
What is the NSN for 7714911?
7714911 is cataloged in the U.S. Government catalog under NSN 5310-00-771-4911. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7714911