PartsTable
Technical Data Sheet
Download PDF

7714589P084 — PACKING WITH RETAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7714589P084: PACKING WITH RETAINER.

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 RETAINER, construction: ONE-PIECEONE-PIECE, outside_diameter: 0.458 INCHES MINIMUM AND 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM0.478 INCHES MAXIMUM IN, surface_treatment: PASSIVATE RETAINERPASSIVATE RETAINER, retainer_thickness: 0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM0.055 INCHES MAXIMUM IN, packing_inside_diameter: 0.176 INCHES MINIMUM AND 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM0.196 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-252-8393, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7714589P084
NSN: 5330-00-252-8393
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 302 RETAINER
constructionONE-PIECEONE-PIECE
outside_diameter0.458 INCHES MINIMUM AND 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM0.478 INCHES MAXIMUM IN
surface_treatmentPASSIVATE RETAINERPASSIVATE RETAINER
retainer_thickness0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM0.055 INCHES MAXIMUM IN
packing_inside_diameter0.176 INCHES MINIMUM AND 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM0.196 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-5059 ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE RETAINERMIL-S-5059 ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
packing_ring_cross-sectional_diameter0.067 INCHES MINIMUM AND 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM0.077 INCHES MAXIMUM IN
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RETAINERQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RETAINER
NSN5330-00-252-8393
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7714589P084 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RETAINERQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RETAINER
•
PACKING INSIDE DIAMETER: 0.176 INCHES MINIMUM AND 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM0.196 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.458 INCHES MINIMUM AND 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM0.478 INCHES MAXIMUM IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.067 INCHES MINIMUM AND 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM0.077 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE RETAINERMIL-S-5059 ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
•
RETAINER THICKNESS: 0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM0.055 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE RETAINERPASSIVATE RETAINER
•
MATERIAL: STEEL COMP 302 RETAINER
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RETAINERQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RETAINER
PACKING INSIDE DIAMETER0.176 INCHES MINIMUM AND 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM0.196 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.458 INCHES MINIMUM AND 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM0.478 INCHES MAXIMUM IN
PACKING RING CROSS-SECTIONAL DIAMETER0.067 INCHES MINIMUM AND 0.067 INCHES MINIMUM AND 0.077 INCHES MAXIMUM0.077 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE RETAINERMIL-S-5059 ANNEALED MIL SPEC SINGLE MATERIAL RESPONSE RETAINER
RETAINER THICKNESS0.045 INCHES MINIMUM AND 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM0.055 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE RETAINERPASSIVATE RETAINER
MATERIALSTEEL COMP 302 RETAINER
CONSTRUCTIONONE-PIECEONE-PIECE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7714589P084?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7714589P084?
7714589P084 is a PACKING WITH RETAINER.
What is the NSN for 7714589P084?
7714589P084 is cataloged in the U.S. Government catalog under NSN 5330-00-252-8393. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7714589P084

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.