PartsTable
Technical Data Sheet
Download PDF

7712510 — NUT,SELF-LOCKING,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7712510: NUT,SELF-LOCKING,CLINCH.

The NUT,SELF-LOCKING,CLINCH is a the manufacturer industrial component. Key specifications include nut_style: CLINCH, nut_height: 0.417 INCHES NOMINAL IN, pilot_length: 0.105 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC), pilot_diameter: 0.357 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-447-3196, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7712510
NSN: 5310-00-447-3196
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
nut_styleCLINCH
nut_height0.417 INCHES NOMINAL IN
pilot_length0.105 INCHES NOMINAL IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.357 INCHES NOMINAL IN
locking_featurePREVAILING TORQUE WITH NONMETALLIC INSERT
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL EXCEPT INSERT
width_across_flats0.438 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES IN
thread_quantity_per_inch20
NSN5310-00-447-3196
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7712510 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD ALL MATERIAL RESPONSES NUT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
PILOT DIAMETER: 0.357 INCHES NOMINAL IN
•
PILOT LENGTH: 0.105 INCHES NOMINAL IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD ALL MATERIAL RESPONSES NUT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
PILOT DIAMETER0.357 INCHES NOMINAL IN
PILOT LENGTH0.105 INCHES NOMINAL IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT HEIGHT0.417 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL EXCEPT INSERT
SUBSTITUTES & CROSS-REFERENCES 1
590832Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7712510?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7712510?
7712510 is a NUT,SELF-LOCKING,CLINCH.
What parts can replace 7712510?
There is 1 known substitute for 7712510: 590832. Substitute compatibility should be verified for your specific system.
What is the NSN for 7712510?
7712510 is cataloged in the U.S. Government catalog under NSN 5310-00-447-3196. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7712510

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.