PartsTable
Technical Data Sheet
Download PDF

7707274 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7707274: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.149 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, diameter: 0.431 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT CHAMFER, chamfer_length: 0.087 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-770-7274, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7707274
NSN: 5315-00-770-7274
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height0.149 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
diameter0.431 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT CHAMFER
chamfer_length0.087 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.555 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
under_head_length1.352 INCHES MINIMUM AND 1.366 INCHES MAXIMUM IN
first_hole_diameter0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
distance_from_centerline_of_hole_to_end_of_pin0.164 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
NSN5315-00-770-7274
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7707274 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.087 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.352 INCHES MINIMUM AND 1.366 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.555 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
•
DIAMETER: 0.431 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.087 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.352 INCHES MINIMUM AND 1.366 INCHES MAXIMUM IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.134 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.555 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
DIAMETER0.431 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN
HEAD STYLEFLAT CHAMFER
HEIGHT0.149 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
560313Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7707274?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7707274?
7707274 is a PIN,STRAIGHT,HEADED.
What parts can replace 7707274?
There is 1 known substitute for 7707274: 560313. Substitute compatibility should be verified for your specific system.
What is the NSN for 7707274?
7707274 is cataloged in the U.S. Government catalog under NSN 5315-00-770-7274. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7707274

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.