PartsTable
Technical Data Sheet
Download PDF

76A017 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

76A017: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: CELLULOSE LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 1.453 INCHES NOMINAL IN, special_features: TWO 5/64 IN. RIBS IN STRAP BASE IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-285-2091, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
76A017
NSN: 5340-00-285-2091
FSC: 5340 — Hardware, Commercial
CAGE: 26916 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP DIV MULTIPLE (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialCELLULOSE LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.750 INCHES NOMINAL IN
overall_length1.453 INCHES NOMINAL IN
special_featuresTWO 5/64 IN. RIBS IN STRAP BASE IN
style_designatorCURVED ARCH
material_thickness0.078 INCHES NOMINAL IN
mounting_hole_size0.161 INCHES NOMINAL IN
inside_diameter/arch_length0.688 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.656 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole0.641 INCHES NOMINAL IN
NSN5340-00-285-2091
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 76A017 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.161 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: CURVED ARCH
•
MATERIAL THICKNESS: 0.078 INCHES NOMINAL IN
•
CUSHION: NOT INCLUDED
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.656 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.161 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORCURVED ARCH
OVERALL LENGTH1.453 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.078 INCHES NOMINAL IN
CUSHIONNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.656 INCHES NOMINAL IN
SPECIAL FEATURESTWO 5/64 IN. RIBS IN STRAP BASE IN
MATERIALCELLULOSE LOCATION NOT OTHERWISE SPECIFIED
SUBSTITUTES & CROSS-REFERENCES 1
46Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 76A017?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 76A017?
76A017 is a STRAP,RETAINING.
What parts can replace 76A017?
There is 1 known substitute for 76A017: 46. Substitute compatibility should be verified for your specific system.
What is the NSN for 76A017?
76A017 is cataloged in the U.S. Government catalog under NSN 5340-00-285-2091. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 76A017