PartsTable
Technical Data Sheet
Download PDF

76981 — BEARING,SLEEVE

✓ Government record, cited
Hotpoint · BOLT SCREW
PRODUCT OVERVIEW

76981: BEARING,SLEEVE.

The BEARING,SLEEVE is a Hotpoint industrial component. Key specifications include corner_shape: SQUARE ALL CORNERS, overall_length: 1.3830 INCHES MINIMUM AND 1.3870 INCHES MAXIMUM IN, body_inside_diameter: 0.5150 INCHES NOMINAL IN, body_outside_diameter: 0.7470 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-281-2855, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
76981
NSN: 5305-00-281-2855
NIINs: 002812855, 011173285
FSC: 5305 — Screws
CAGE: 49695 — PARKER-HANNIFIN CORPORATION (USA)
SPECIFICATIONS
corner_shapeSQUARE ALL CORNERS
overall_length1.3830 INCHES MINIMUM AND 1.3870 INCHES MAXIMUM IN
body_inside_diameter0.5150 INCHES NOMINAL IN
body_outside_diameter0.7470 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM IN
NSN5305-00-281-2855
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 76981 · Hotpoint ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.200 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.200 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: FLAT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
FASTENER LENGTH0.200 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.200 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLEFLAT
SPECIAL FEATURES6 HOLES 0.040 IN. DIA SOCKET DRIVE END IN
SURFACE TREATMENTPASSIVATE OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
10125099Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 76981?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 76981?
76981 is a BEARING,SLEEVE manufactured by Hotpoint.
What parts can replace 76981?
There is 1 known substitute for 76981: 10125099. Substitute compatibility should be verified for your specific system.
What is the NSN for 76981?
76981 is cataloged in the U.S. Government catalog under NSN 5305-00-281-2855. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 76981

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.