PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7684-89965-001
7684-89965-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1117 OVERALL, overall_width: 3.125 INCHES NOMINAL IN, overall_height: 3.500 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN, operation_method: HANDLE, surface_treatment: ZINC OVERALL, end_item_identification: GENERAL HANDLING EQUIPMENT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-204-3911, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7684-89965-001
NSN: 5340-01-204-3911
FSC: 5340
CAGE: 15090 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 1117 OVERALL
overall_width3.125 INCHES NOMINAL IN
overall_height3.500 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
operation_methodHANDLE
surface_treatmentZINC OVERALL
end_item_identificationGENERAL HANDLING EQUIPMENT
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-204-3911
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7684-89965-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 1117 OVERALL
•
OPERATION METHOD: HANDLE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTZINC OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 1117 OVERALL
OVERALL WIDTH3.125 INCHES NOMINAL IN
END ITEM IDENTIFICATIONGENERAL HANDLING EQUIPMENT
OPERATION METHODHANDLE
OVERALL HEIGHT3.500 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
53-850Interchangeable
interchangeable cross-reference
interchangeable
651314Interchangeable
interchangeable cross-reference
interchangeable
2412 25/32Interchangeable
interchangeable cross-reference
interchangeable
10223Interchangeable
interchangeable cross-reference
interchangeable
5-4-5121Interchangeable
interchangeable cross-reference
interchangeable
889-LInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7684-89965-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7684-89965-001?
7684-89965-001 is a CATCH,CLAMPING.
What parts can replace 7684-89965-001?
There are 8 known substitutes for 7684-89965-001: 53-850, 651314, 2412 25/32 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7684-89965-001?
7684-89965-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-204-3911. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7684-89965-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026