PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7680-55934-001
7680-55934-001 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.4371 INCHES MINIMUM AND 0.4377 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 0.9275 INCHES MINIMUM AND 0.9425 INCHES MAXIMUM IN, outer_ring_width: 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-163-3188, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7680-55934-001
NSN: 3110-01-163-3188
FSC: 3110
CAGE: 15090 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.4371 INCHES MINIMUM AND 0.4377 INCHES MAXIMUM IN
seal_quantity2
alignment_typeRIGID
surface_finishGROUND
inner_ring_width0.9275 INCHES MINIMUM AND 0.9425 INCHES MAXIMUM IN
outer_ring_width0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
style_designatorCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
bearing_seal_typeCONTACT
surface_treatmentOXIDE ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter1.6240 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN
NSN3110-01-163-3188
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7680-55934-001 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.4371 INCHES MINIMUM AND 0.4377 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL: GREASE
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OUTER RING WIDTH: 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
BEARING SEAL TYPE: CONTACT
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.4371 INCHES MINIMUM AND 0.4377 INCHES MAXIMUM IN
SURFACE FINISHGROUND
LUBRICATION MATERIALGREASE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OUTER RING WIDTH0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
BEARING SEAL TYPECONTACT
RETAINER FABRICATION METHODPRESSED
SURFACE TREATMENTOXIDE ALL EXTERNAL/EXPOSED METAL SURFACES
STYLE DESIGNATORCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
CF15-700Interchangeable
interchangeable cross-reference
interchangeable
15-700Interchangeable
interchangeable cross-reference
interchangeable
CF15Interchangeable
interchangeable cross-reference
interchangeable
24098-600Interchangeable
interchangeable cross-reference
interchangeable
24098Interchangeable
interchangeable cross-reference
interchangeable
415796-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7680-55934-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7680-55934-001?
7680-55934-001 is a BEARING,ROLLER,NEEDLE.
What parts can replace 7680-55934-001?
There are 11 known substitutes for 7680-55934-001: CF15-700, 15-700, CF15 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7680-55934-001?
7680-55934-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-163-3188. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7680-55934-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026