PartsTable
Technical Data Sheet
Download PDF

7665448 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7665448: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, nut_style: HEXAGON, nut_height: 0.185 INCHES NOMINAL IN, thread_series: UNS, special_features: TOP OF NUT GROOVED 0.065IN.W/0.043IN.DEEP,0.582IN.DIA. IN, thread_direction: RIGHT-HAND.

This part is cataloged in the U.S. Government catalog under NSN 5310-00-766-5448, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7665448
NSN: 5310-00-766-5448
FSC: 5310 — Nuts and Washers
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
nut_styleHEXAGON
nut_height0.185 INCHES NOMINAL IN
thread_seriesUNS
special_featuresTOP OF NUT GROOVED 0.065IN.W/0.043IN.DEEP,0.582IN.DIA. IN
thread_directionRIGHT-HAND
surface_treatmentNICKEL OVERALL
width_across_flats0.750 INCHES NOMINAL IN
nominal_thread_size0.469 INCHES IN
bearing_surface_typeWASHER FACED
thread_pitch_diameters+0.4487 TO 0.4513 INCHES IN
thread_quantity_per_inch32
NSN5310-00-766-5448
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7665448 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.750 INCHES NOMINAL IN
•
THREAD SERIES: UNS
•
THREAD PITCH DIAMETERS: +0.4487 TO 0.4513 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.469 INCHES IN
•
NUT HEIGHT: 0.185 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.750 INCHES NOMINAL IN
THREAD SERIESUNS
THREAD PITCH DIAMETERS+0.4487 TO 0.4513 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.469 INCHES IN
NUT HEIGHT0.185 INCHES NOMINAL IN
SPECIAL FEATURESTOP OF NUT GROOVED 0.065IN.W/0.043IN.DEEP,0.582IN.DIA. IN
SURFACE TREATMENTNICKEL OVERALL
NUT STYLEHEXAGON
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
2360-240000-48-0Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7665448?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7665448?
7665448 is a NUT,PLAIN,HEXAGON.
What parts can replace 7665448?
There is 1 known substitute for 7665448: 2360-240000-48-0. Substitute compatibility should be verified for your specific system.
What is the NSN for 7665448?
7665448 is cataloged in the U.S. Government catalog under NSN 5310-00-766-5448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7665448