PartsTable
Technical Data Sheet
Download PDF

7663-001-072VM — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7663-001-072VM: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, first_end_style: CHAMFERED, first_hole_diameter: 0.380 INCHES NOMINAL IN, pin_overall_diameter: 0.7500 INCHES NOMINAL IN, second_hole_diameter: 0.380 INCHES NOMINAL IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-344-6495, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7663-001-072VM
NSN: 5315-01-344-6495
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
first_end_styleCHAMFERED
first_hole_diameter0.380 INCHES NOMINAL IN
pin_overall_diameter0.7500 INCHES NOMINAL IN
second_hole_diameter0.380 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.190 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
end_item_identificationSWING CHECK VALVE
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes2.750 INCHES NOMINAL IN
reference_number_differentiating_characteristicsMAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
NSN5315-01-344-6495
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7663-001-072VM · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.190 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.380 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.7500 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SECOND HOLE DIAMETER: 0.380 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.190 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.380 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.7500 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND HOLE DIAMETER0.380 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN HOLES2.750 INCHES NOMINAL IN
END ITEM IDENTIFICATIONSWING CHECK VALVE
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 3
73811-130/7663-0Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
73811-130/7663-001-072Reference document
Same NSN cross-reference
Reference document — Secondary reference
7663-001-072Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7663-001-072VM?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7663-001-072VM?
7663-001-072VM is a PIN,STRAIGHT,HEADLESS.
What parts can replace 7663-001-072VM?
There are 3 known substitutes for 7663-001-072VM: 73811-130/7663-0, 73811-130/7663-001-072, 7663-001-072. Substitute compatibility should be verified for your specific system.
What is the NSN for 7663-001-072VM?
7663-001-072VM is cataloged in the U.S. Government catalog under NSN 5315-01-344-6495. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7663-001-072VM

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.