PartsTable
Technical Data Sheet
Download PDF

76612 — AIR CLEANER,INTAKE

✓ Government record, cited
Legrand · ORING SEAL
PRODUCT OVERVIEW

76612: AIR CLEANER,INTAKE.

The AIR CLEANER,INTAKE is a Legrand industrial component. Key specifications include material: STEEL CORROSION RESISTING, inlet_type: SLEEVE, filter_type: DRY, outlet_type: SLEEVE, sleeve_length: 1.910 INCHES NOMINAL IN, backfire_valve: NOT INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-432-3920, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
76612
NSN: 5340-00-432-3920
NIINs: 004323920, 011773585
FSC: 5340 — Hardware, Commercial
CAGE: 81982 — HYDRO-AIRE AEROSPACE CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
quantity1
inlet_typeSLEEVE
filter_typeDRY
outlet_typeSLEEVE
sleeve_length1.910 INCHES NOMINAL IN
backfire_valveNOT INCLUDED
integral_clampINCLUDED
overall_height25.310 INCHES NOMINAL IN
submersibilityNONSUBMERSIBLE
outlet_locationRIGHT END OF CLEANER
sleeve_locationTOP OF CLEANER TO THE LEFT OF CENTER
NSN5340-00-432-3920
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 76612 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.173 INCHES NOMINAL IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: FUEL, AROMATIC
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE: 0.828 INCHES NOMINAL IN
•
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RIGHT HAND CLAMP & BRACKET
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.173 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.173 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONFUEL, AROMATIC
CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE0.828 INCHES NOMINAL IN
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER0.250 INCHES NOMINAL IN
STYLE DESIGNATORRIGHT HAND CLAMP & BRACKET
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.173 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
LUG WIDTH0.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 76612?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 76612?
76612 is a AIR CLEANER,INTAKE manufactured by Legrand.
What is the NSN for 76612?
76612 is cataloged in the U.S. Government catalog under NSN 5340-00-432-3920. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 76612

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.