PartsTable
Technical Data Sheet
Download PDF

7660590 — RETAINER,HELICAL COMPRESSION SPR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7660590: RETAINER,HELICAL COMPRESSION SPR.

RETAINER,HELICAL COMPRESSION SPR. Key specifications include material: STEEL COMP 303, overall_height: 0.312 INCHES NOMINAL IN, style_designator: IRREGULAR, body_inside_diameter: 0.218 INCHES NOMINAL IN, inside_chamfer_depth: 0.250 INCHES NOMINAL IN, body_outside_diameter: 0.281 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-087-6538, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7660590
NSN: 5340-00-087-6538
FSC: 5340 — Hardware, Commercial
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialSTEEL COMP 303
overall_height0.312 INCHES NOMINAL IN
style_designatorIRREGULAR
body_inside_diameter0.218 INCHES NOMINAL IN
inside_chamfer_depth0.250 INCHES NOMINAL IN
body_outside_diameter0.281 INCHES NOMINAL IN
outside_chamfer_depth0.062 INCHES NOMINAL IN
casehardening_indicatorCASEHARDENED
material_document_and_classificationQQ-S-763, CLASS 303, COND A FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-087-6538
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7660590 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY OUTSIDE DIAMETER: 0.281 INCHES NOMINAL IN
•
STYLE DESIGNATOR: IRREGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763, CLASS 303, COND A FED SPEC SINGLE MATERIAL RESPONSE
•
INSIDE CHAMFER DEPTH: 0.250 INCHES NOMINAL IN
•
BODY INSIDE DIAMETER: 0.218 INCHES NOMINAL IN
•
CASEHARDENING INDICATOR: CASEHARDENED
•
MATERIAL: STEEL COMP 303
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.312 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER0.281 INCHES NOMINAL IN
STYLE DESIGNATORIRREGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763, CLASS 303, COND A FED SPEC SINGLE MATERIAL RESPONSE
INSIDE CHAMFER DEPTH0.250 INCHES NOMINAL IN
BODY INSIDE DIAMETER0.218 INCHES NOMINAL IN
CASEHARDENING INDICATORCASEHARDENED
MATERIALSTEEL COMP 303
OUTSIDE CHAMFER DEPTH0.062 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7660590?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7660590?
7660590 is a RETAINER,HELICAL COMPRESSION SPR.
What is the NSN for 7660590?
7660590 is cataloged in the U.S. Government catalog under NSN 5340-00-087-6538. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7660590