PartsTable
Technical Data Sheet
Download PDF

7632-010-052 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7632-010-052: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_thickness: 1.375 INCHES NOMINAL IN, thread_series: UN, flange_thickness: 0.235 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, small_end_diameter: 1.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-468-8780, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7632-010-052
NSN: 5310-01-468-8780
FSC: 5310 — Nuts and Washers
CAGE: 57574 — VELAN VALVE CORP. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_thickness1.375 INCHES NOMINAL IN
thread_seriesUN
flange_thickness0.235 INCHES NOMINAL IN
thread_directionRIGHT-HAND
small_end_diameter1.750 INCHES NOMINAL IN
undercut_thickness0.640 INCHES NOMINAL IN
width_across_flats2.000 INCHES NOMINAL IN
nominal_thread_size1.750 INCHES IN
bearing_surface_finish125.0 MICROINCHES
end_item_identificationVALVE GLOBE:WSD;MIMITZ CLASS CVN
thread_quantity_per_inch12
NSN5310-01-468-8780
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7632-010-052 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 2.000 INCHES NOMINAL IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
FLANGE THICKNESS: 0.235 INCHES NOMINAL IN
•
THREAD SERIES: UN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.750 INCHES IN
•
UNDERCUT THICKNESS: 0.640 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS2.000 INCHES NOMINAL IN
BEARING SURFACE FINISH125.0 MICROINCHES
FLANGE THICKNESS0.235 INCHES NOMINAL IN
THREAD SERIESUN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.750 INCHES IN
UNDERCUT THICKNESS0.640 INCHES NOMINAL IN
NUT THICKNESS1.375 INCHES NOMINAL IN
SMALL END DIAMETER1.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
9999-001 ITEM NO. 06Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9999-001Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7632-010-052?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7632-010-052?
7632-010-052 is a NUT,PLAIN,ROUND.
What parts can replace 7632-010-052?
There are 2 known substitutes for 7632-010-052: 9999-001 ITEM NO. 06, 9999-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 7632-010-052?
7632-010-052 is cataloged in the U.S. Government catalog under NSN 5310-01-468-8780. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7632-010-052

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.