PartsTable
Technical Data Sheet
Download PDF

762877-15 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

762877-15: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.031 INCHES MINIMUM AND 0.039 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.104 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN, thread_length: 0.059 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, fastener_length: 0.084 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-185-4603, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
762877-15
NSN: 5305-01-185-4603
FSC: 5305 — Screws
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.031 INCHES MINIMUM AND 0.039 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.104 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
thread_length0.059 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L
fastener_length0.084 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.060 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch80
NSN5305-01-185-4603
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 762877-15 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.031 INCHES MINIMUM AND 0.039 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 0.084 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.059 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.060 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.031 INCHES MINIMUM AND 0.039 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH0.084 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
THREAD LENGTH0.059 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.060 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L
INTERNAL DRIVE STYLESLOT
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
752877-15Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
752877-015Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 762877-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 762877-15?
762877-15 is a SCREW,MACHINE.
What parts can replace 762877-15?
There are 2 known substitutes for 762877-15: 752877-15, 752877-015. Substitute compatibility should be verified for your specific system.
What is the NSN for 762877-15?
762877-15 is cataloged in the U.S. Government catalog under NSN 5305-01-185-4603. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 762877-15

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.