PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 762115
762115 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RETAINER AND ROLLERS,BEARING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8630 OVERALL, shear_strength: 180000 SINGLE POUNDS PER SQUARE INCH, first_end_style: CHAMFERED, hardness_rating: 29.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL, pin_overall_length: 1.590 INCHES NOMINAL IN, pin_overall_diameter: 0.3100 INCHES MINIMUM AND 0.3110 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-597-1583, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
762115
NSN: 5315-00-597-1583
FSC: 5315
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 8630 OVERALL
shear_strength180000 SINGLE POUNDS PER SQUARE INCH
first_end_styleCHAMFERED
hardness_rating29.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
pin_overall_length1.590 INCHES NOMINAL IN
pin_overall_diameter0.3100 INCHES MINIMUM AND 0.3110 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.030 INCHES NOMINAL IN
material_document_and_classificationMIL-S-6050,F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-597-1583
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 762115 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 1.590 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.030 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 8630 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050,F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 29.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SHEAR STRENGTH: 180000 SINGLE POUNDS PER SQUARE INCH
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH1.590 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.030 INCHES NOMINAL IN
MATERIALSTEEL COMP 8630 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6050,F4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING29.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SHEAR STRENGTH180000 SINGLE POUNDS PER SQUARE INCH
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.3100 INCHES MINIMUM AND 0.3110 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
BMC-12757Interchangeable
interchangeable cross-reference
interchangeable
1SE6076SUN40516Interchangeable
interchangeable cross-reference
interchangeable
1-SE-6076Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 762115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 762115?
762115 is a RETAINER AND ROLLERS,BEARING.
What parts can replace 762115?
There are 3 known substitutes for 762115: BMC-12757, 1SE6076SUN40516, 1-SE-6076. Substitute compatibility should be verified for your specific system.
What is the NSN for 762115?
762115 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-597-1583. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 762115

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026