PartsTable
Technical Data Sheet
Download PDF

7618476P2 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

7618476P2: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.280 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, pilot_length: 0.0620 INCHES NOMINAL IN, shaft_length: 0.593 INCHES MINIMUM AND 0.657 INCHES MAXIMUM IN, shaft_runout: 0.001 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-789-5922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7618476P2
NSN: 5905-00-789-5922
FSC: 5905 — Resistor
CAGE: 99971 — LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.280 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.593 INCHES MINIMUM AND 0.657 INCHES MAXIMUM IN
shaft_runout0.001 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter1.093 INCHES NOMINAL IN
lateral_runout0.0015 INCHES IN
pilot_diameter0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM IN
shaft_diameter0.1244 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN
undercut_width0.0570 INCHES MINIMUM IN
NSN5905-00-789-5922
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN 7618476P2 MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 1.28 INCH-OUNCES IN
•
BODY DIAMETER: 1.093 INCHES NOMINAL IN
•
LATERAL RUNOUT: 0.0015 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 1.7 KILOHMS ALL SECTIONS
•
MOUNTING LIP DEPTH: 0.0620 INCHES NOMINAL IN
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 125.0 ALL SECTIONS
•
UNDERCUT WIDTH: 0.0570 INCHES MINIMUM IN
•
SECTION QUANTITY: 4
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE1.28 INCH-OUNCES IN
BODY DIAMETER1.093 INCHES NOMINAL IN
LATERAL RUNOUT0.0015 INCHES IN
ELECTRICAL RESISTANCE PER SECTION1.7 KILOHMS ALL SECTIONS
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 ALL SECTIONS
UNDERCUT WIDTH0.0570 INCHES MINIMUM IN
SECTION QUANTITY4
SHAFT DIAMETER0.1244 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.975 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
21119-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7618476P0002Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 7618476P2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7618476P2?
7618476P2 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7618476P2?
There are 2 known substitutes for 7618476P2: 21119-2, 7618476P0002. Substitute compatibility should be verified for your specific system.
What is the NSN for 7618476P2?
7618476P2 is cataloged in the U.S. Government catalog under NSN 5905-00-789-5922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7618476P2