PartsTable
Technical Data Sheet
Download PDF

761708L — LEAF,BUTT HINGE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

761708L: LEAF,BUTT HINGE.

The LEAF,BUTT HINGE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hinge_pin: NOT INCLUDED, knuckle_type: FRICTION, knuckle_length: 0.325 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN, overall_length: 7.902 INCHES NOMINAL IN, knuckle_quantity: 11. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-598-7380, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
761708L
NSN: 5340-00-598-7380
FSC: 5340 — Hardware, Commercial
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hinge_pinNOT INCLUDED
knuckle_typeFRICTION
knuckle_length0.325 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
overall_length7.902 INCHES NOMINAL IN
knuckle_quantity11
performance_typeNOT RATED
style_designatorBUTT PARALLEL HOLES
material_thickness0.160 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
mounting_hole_diameter0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN
mounting_hole_quantity7
NSN5340-00-598-7380
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 761708L MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 7
•
REVERSIBLE FEATURE: NOT INCLUDED
•
KNUCKLE INSIDE DIAMETER: 0.2100 INCHES MINIMUM AND 0.2160 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BUTT PARALLEL HOLES
•
MOUNTING HOLE DIAMETER: 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN
•
PIN CENTER TO BODY EDGE DISTANCE: 1.280 INCHES NOMINAL IN
•
HINGE PIN: NOT INCLUDED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY7
REVERSIBLE FEATURENOT INCLUDED
KNUCKLE INSIDE DIAMETER0.2100 INCHES MINIMUM AND 0.2160 INCHES MAXIMUM IN
STYLE DESIGNATORBUTT PARALLEL HOLES
MOUNTING HOLE DIAMETER0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN
OVERALL LENGTH7.902 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE1.280 INCHES NOMINAL IN
HINGE PINNOT INCLUDED
MATERIAL THICKNESS0.160 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.200 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 761708L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 761708L?
761708L is a LEAF,BUTT HINGE.
What is the NSN for 761708L?
761708L is cataloged in the U.S. Government catalog under NSN 5340-00-598-7380. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 761708L

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.