The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 0.585 INCHES NOMINAL IN, first_leg_length: 0.578 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN, second_leg_style: SQUARE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-180-2578, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
7614-0046-01
NSN:5340-01-180-2578 FSC:5340 — Hardware, Commercial CAGE:17472 — EATON AEROSPACE LLC DBA EATON INOAC DIV FUEL & MOTION CONTROL SYSTEMS DIVISION (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 6061
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
SQUARE
first_leg_width
0.585 INCHES NOMINAL IN
first_leg_length
0.578 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
second_leg_style
SQUARE
second_leg_width
0.780 INCHES NOMINAL IN
style_designator
ANGLE
second_leg_length
0.658 INCHES MINIMUM AND 0.662 INCHES MAXIMUM IN
surface_treatment
CHROMATE
mounting_hole_type
PLAIN
first_leg_thickness
0.038 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
NSN
5340-01-180-2578
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.255 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: PS 13204,FSCM 17472 MFR REF SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.255 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
FIRST LEG ANGLE
90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.250 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
PS 13204,FSCM 17472 MFR REF SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH
0.780 INCHES NOMINAL IN
SECOND LEG LENGTH
0.658 INCHES MINIMUM AND 0.662 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7614-0046-01?
7614-0046-01 is a BRACKET,ANGLE.
What is the NSN for 7614-0046-01?
7614-0046-01 is cataloged in the U.S. Government catalog under NSN 5340-01-180-2578. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.