PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7612002
7612002 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 0.3125 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-729-6465, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7612002
NSN: 3110-00-729-6465
FSC: 3110
CAGE: 01714 — LUCENT TECHNOLOGIES INC ADVANCED TECHNOLOGY SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter0.5000 INCHES NOMINAL IN
overall_width0.3125 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresFILLED 1/2 FULL W/GREASE
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter1.1250 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
NSN3110-00-729-6465
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7612002 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURESFILLED 1/2 FULL W/GREASE
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
SHIELD QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
Z97R8XRIEInterchangeable
interchangeable cross-reference
interchangeable
525-134-004Interchangeable
interchangeable cross-reference
interchangeable
AA59644-113AFHBInterchangeable
interchangeable cross-reference
interchangeable
309-7015-050Interchangeable
interchangeable cross-reference
interchangeable
7579000-002Interchangeable
interchangeable cross-reference
interchangeable
S5KDDInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7612002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7612002?
7612002 is a BEARING,BALL,ANNULAR.
What parts can replace 7612002?
There are 30 known substitutes for 7612002: Z97R8XRIE, 525-134-004, AA59644-113AFHB and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7612002?
7612002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-729-6465. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7612002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026