PartsTable
Technical Data Sheet
Download PDF

7609511 — 7609511

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

7609511: 7609511.

The 7609511 is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, hole_diameter: 0.109 INCHES NOMINAL IN, overall_width: 1.250 INCHES NOMINAL IN, aperture_width: 1.000 INCHES NOMINAL IN, overall_length: 2.560 INCHES NOMINAL IN, aperture_length: 2.310 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-550-0362, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7609511
NSN: 5310-00-550-0362
NIINs: 005500362, 011281252
FSC: 5310 — Nuts and Washers
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
hole_diameter0.109 INCHES NOMINAL IN
overall_width1.250 INCHES NOMINAL IN
aperture_width1.000 INCHES NOMINAL IN
overall_length2.560 INCHES NOMINAL IN
aperture_length2.310 INCHES NOMINAL IN
bolt_hole_quantity2
inside_corner_radius0.125 INCHES NOMINAL IN
cross-sectional_thickness0.045 INCHES NOMINAL IN
environmental_protection_material_locationRF SHIELDING GASKET OUTER EDGE
outside_edge_to_bolt_hole_center_distance_along_width0.125 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.125 INCHES NOMINAL IN
NSN5310-00-550-0362
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7609511 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-640 FS FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: ZINC OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 1009 OR STEEL COMP 1015 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-640 FS FED SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTZINC OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 1009 OR STEEL COMP 1015 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.320 INCHES NOMINAL IN
THICKNESS0.032 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
BL725043Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7609511?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7609511?
7609511 is a 7609511. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7609511?
There is 1 known substitute for 7609511: BL725043. Substitute compatibility should be verified for your specific system.
What is the NSN for 7609511?
7609511 is cataloged in the U.S. Government catalog under NSN 5310-00-550-0362. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7609511

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.