PartsTable
Technical Data Sheet
Download PDF

760563-1 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

760563-1: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.265 INCHES MINIMUM AND 0.268 INCHES MAXIMUM IN, overall_height: 0.040 INCHES NOMINAL IN, outside_diameter: 0.375 INCHES NOMINAL IN, material_thickness: 0.008 INCHES NOMINAL IN, material_document_and_classification: QQ-C-533 TEMPER A FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-527-4660, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
760563-1
NSN: 5310-00-527-4660
FSC: 5310 — Nuts and Washers
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.265 INCHES MINIMUM AND 0.268 INCHES MAXIMUM IN
overall_height0.040 INCHES NOMINAL IN
outside_diameter0.375 INCHES NOMINAL IN
material_thickness0.008 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 TEMPER A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-527-4660
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 760563-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 TEMPER A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.008 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
HOLE DIAMETER: 0.265 INCHES MINIMUM AND 0.268 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.040 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 TEMPER A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.008 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.265 INCHES MINIMUM AND 0.268 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 760563-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 760563-1?
760563-1 is a WASHER,SPRING TENSION.
What is the NSN for 760563-1?
760563-1 is cataloged in the U.S. Government catalog under NSN 5310-00-527-4660. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 760563-1