PartsTable
Technical Data Sheet
Download PDF

760411 — THERMAL COMPOUND

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

760411: THERMAL COMPOUND.

The THERMAL COMPOUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.735 INCHES NOMINAL IN, first_leg_length: 0.825 INCHES NOMINAL IN, second_leg_style: ANGLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-037-6542, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
760411
NSN: 5340-01-037-6542
NIINs: 010376542, 011396762
FSC: 5340 — Hardware, Commercial
CAGE: 52661 — RTX CORPORATION DIV PRATT & WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width1.735 INCHES NOMINAL IN
first_leg_length0.825 INCHES NOMINAL IN
second_leg_styleANGLE
special_featuresROCKWELL HARDNESS C20-26; SECOND LEG ANGLE BEGINS 0.620 IN. FROM FIRST LEG,45.0 DEG ANGLE CUT 0.250 IN. FROM EDGE OF SECOND LEG OPPOSITE SIDE IN
style_designatorANGLE
second_leg_length2.250 INCHES NOMINAL IN
first_leg_thickness0.062 INCHES NOMINAL IN
second_leg_thickness0.062 INCHES NOMINAL IN
first_leg_corner_radius0.250 INCHES NOMINAL IN
NSN5340-01-037-6542
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 760411 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.550 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.275 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.331 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.250 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.223 INCHES NOMINAL IN
•
FIRST LEG CORNER RADIUS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.550 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.275 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.331 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.250 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.223 INCHES NOMINAL IN
FIRST LEG CORNER RADIUS0.250 INCHES NOMINAL IN
SECOND LEG LENGTH2.250 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 760411?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 760411?
760411 is a THERMAL COMPOUND.
What is the NSN for 760411?
760411 is cataloged in the U.S. Government catalog under NSN 5340-01-037-6542. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 760411

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.