PartsTable
Technical Data Sheet
Download PDF

76032 — MICROCIRCUIT,DIGITAL

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

76032: MICROCIRCUIT,DIGITAL.

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: STEEL INNER MEMBER, body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, body_length: 0.785 INCHES MAXIMUM IN, bore_diameter: 1.2500 INCHES MINIMUM AND 1.2508 INCHES MAXIMUM IN, hardness_rating: 56.0 ROCKWELL C NOMINAL INNER MEMBER. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-720-2338, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
76032
NSN: 3120-00-720-2338
NIINs: 007202338, 010590582, 015113653, 016623692
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 10133 — MICROMATIC TEXTRON INC SUB OF TEXTRON INC (USA)
SPECIFICATIONS
materialSTEEL INNER MEMBER
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
body_height0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
body_length0.785 INCHES MAXIMUM IN
bore_diameter1.2500 INCHES MINIMUM AND 1.2508 INCHES MAXIMUM IN
hardness_rating56.0 ROCKWELL C NOMINAL INNER MEMBER
style_designatorWITHOUT INSERT OR LINER
features_providedHERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND LOW POWER AND SCHOTTKY AND W/ENABLE AND NEGATIVE EDGE TRIGGERED AND RESETTABLE AND W/COMPLEMENT AND ASYNCHRONOUS
output_logic_formTRANSISTOR-TRANSISTOR LOGIC
inclosure_materialCERAMIC AND GLASS
inner_member_width1.0910 INCHES MINIMUM AND 1.0930 INCHES MAXIMUM IN
outer_member_width0.8520 INCHES NOMINAL IN
NSN3120-00-720-2338
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 76032 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER MEMBER WIDTH: 1.0910 INCHES MINIMUM AND 1.0930 INCHES MAXIMUM IN
•
HARDNESS RATING: 56.0 ROCKWELL C NOMINAL INNER MEMBER
•
OUTER MEMBER WIDTH: 0.8520 INCHES NOMINAL IN
•
STYLE DESIGNATOR: WITHOUT INSERT OR LINER
•
BORE DIAMETER: 1.2500 INCHES MINIMUM AND 1.2508 INCHES MAXIMUM IN
•
MATERIAL: STEEL INNER MEMBER
TECHNICAL CHARACTERISTICS
INNER MEMBER WIDTH1.0910 INCHES MINIMUM AND 1.0930 INCHES MAXIMUM IN
HARDNESS RATING56.0 ROCKWELL C NOMINAL INNER MEMBER
HARDNESS RATING34.0 ROCKWELL C NOMINAL OUTER RACE MEMBER
OUTER MEMBER WIDTH0.8520 INCHES NOMINAL IN
STYLE DESIGNATORWITHOUT INSERT OR LINER
BORE DIAMETER1.2500 INCHES MINIMUM AND 1.2508 INCHES MAXIMUM IN
MATERIALSTEEL INNER MEMBER
MATERIALSTEEL OUTER RACE MEMBER
OUTER MEMBER OUTSIDE DIAMETER2.0000 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
BACB10F5Reference document
Same NSN cross-reference
Reference document — Secondary reference
10-60545-124Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 76032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 76032?
76032 is a MICROCIRCUIT,DIGITAL.
What parts can replace 76032?
There are 2 known substitutes for 76032: BACB10F5, 10-60545-124. Substitute compatibility should be verified for your specific system.
What is the NSN for 76032?
76032 is cataloged in the U.S. Government catalog under NSN 3120-00-720-2338. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 76032

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.