PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7602843
7602843 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.192 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN, material: RUBBER CUSHION, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CHROMATE ZINC AND ZINC BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-7499, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7602843
NSN: 5340-00-200-7499
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.192 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
materialRUBBER CUSHION
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCHROMATE ZINC AND ZINC BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.563 INCHES NOMINAL IN
cushioning_environmental_protectionOIL RESISTANT
distance_from_loop_center_to_tongue_end0.750 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.531 INCHES NOMINAL IN
NSN5340-00-200-7499
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7602843 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CUSHION
•
CUSHIONING ENVIRONMENTAL PROTECTION: OIL RESISTANT
•
STYLE DESIGNATOR: SINGLE LOOP
•
SURFACE TREATMENT: CHROMATE ZINC AND ZINC BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.531 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER CUSHION
CUSHIONING ENVIRONMENTAL PROTECTIONOIL RESISTANT
MATERIALRUBBER CUSHION
STYLE DESIGNATORSINGLE LOOP
SURFACE TREATMENTCHROMATE ZINC AND ZINC BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.531 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
SURFACE TREATMENTCHROMATE ZINC AND ZINC BAND
LOOP INSIDE DIAMETER0.563 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
22065BInterchangeable
interchangeable cross-reference
interchangeable
22065Interchangeable
interchangeable cross-reference
interchangeable
376MEH1Interchangeable
interchangeable cross-reference
interchangeable
BX-9573Interchangeable
interchangeable cross-reference
interchangeable
PEI 6836Interchangeable
interchangeable cross-reference
interchangeable
767446-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7602843?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7602843?
7602843 is a CLAMP,LOOP.
What parts can replace 7602843?
There are 11 known substitutes for 7602843: 22065B, 22065, 376MEH1 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7602843?
7602843 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-7499. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7602843

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026