PartsTable
Technical Data Sheet
Download PDF

7601716 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

7601716: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.327 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.438 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, screw_material: STEEL COMP 4037 OR STEEL COMP 8630, fastener_length: 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-151-2525, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7601716
NSN: 5305-00-151-2525
FSC: 5305 — Screws
CAGE: 00000
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.327 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.438 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
screw_materialSTEEL COMP 4037 OR STEEL COMP 8630
fastener_length0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
NSN5305-00-151-2525
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 7601716 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.438 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
THREAD LENGTH0.438 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 4037 OR STEEL COMP 8630
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 5
174728Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN509-10R13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S52-10-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILS7839Reference document
Same NSN cross-reference
Reference document — Secondary reference
S1029421-10-14Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 7601716?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7601716?
7601716 is a SCREW,MACHINE.
What parts can replace 7601716?
There are 5 known substitutes for 7601716: 174728, AN509-10R13, S52-10-6 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7601716?
7601716 is cataloged in the U.S. Government catalog under NSN 5305-00-151-2525. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7601716

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.