PartsTable
Technical Data Sheet
Download PDF

76-808614-3 — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

76-808614-3: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 2.970 INCHES MINIMUM AND 3.190 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 7075 OVERALL, closed_length: 19.970 INCHES MINIMUM AND 20.030 INCHES MAXIMUM IN, extended_length: 41.750 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), special_features: MINIMUM REQUIREMENTS; NOT DUPLICATES OF P/N 76-808614-1 AND -2. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-328-1647, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
76-808614-3
NSN: 5340-01-328-1647
FSC: 5340 — Hardware, Commercial
CAGE: 07397 — GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS INC. DBA GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS (USA)
SPECIFICATIONS
width2.970 INCHES MINIMUM AND 3.190 INCHES MAXIMUM IN
materialALUMINUM ALLOY 7075 OVERALL
closed_length19.970 INCHES MINIMUM AND 20.030 INCHES MAXIMUM IN
extended_length41.750 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
special_featuresMINIMUM REQUIREMENTS; NOT DUPLICATES OF P/N 76-808614-1 AND -2
surface_treatmentANODIZE OVERALL
end_item_identificationW/S: ELECTRONIC WARFARE, AN/WLR-8; LOS ANGELES CLASS SSN (688); SUBMARINE SURVEILLANCE SYSTEMS
side_for_which_designedLEFT HAND
material_document_and_classificationQQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-328-1647
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 76-808614-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED LENGTH: 41.750 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CLOSED LENGTH: 19.970 INCHES MINIMUM AND 20.030 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
WIDTH: 2.970 INCHES MINIMUM AND 3.190 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED LENGTH41.750 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CLOSED LENGTH19.970 INCHES MINIMUM AND 20.030 INCHES MAXIMUM IN
SPECIAL FEATURESMINIMUM REQUIREMENTS; NOT DUPLICATES OF P/N 76-808614-1 AND -2
SURFACE TREATMENTANODIZE OVERALL
WIDTH2.970 INCHES MINIMUM AND 3.190 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONW/S: ELECTRONIC WARFARE, AN/WLR-8; LOS ANGELES CLASS SSN (688); SUBMARINE SURVEILLANCE SYSTEMS
MATERIALALUMINUM ALLOY 7075 OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
04542-0109-49-1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
145626-LSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
04542-0110-49-2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 76-808614-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 76-808614-3?
76-808614-3 is a SLIDE,DRAWER,EXTENSION.
What parts can replace 76-808614-3?
There are 3 known substitutes for 76-808614-3: 04542-0109-49-1, 145626-L, 04542-0110-49-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 76-808614-3?
76-808614-3 is cataloged in the U.S. Government catalog under NSN 5340-01-328-1647. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 76-808614-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.