PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 76-016
76-016 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, body_style: BARRIER TYPE, body_width: 0.265 INCHES NOMINAL IN, bore_style: W/ KEYWAY BOTH ENDS, body_height: 0.188 INCHES NOMINAL IN, body_length: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-163-6928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
76-016
NSN: 5330-00-163-6928
FSC: 5330
CAGE: 18925 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV PNEUMATIC DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
body_styleBARRIER TYPE
body_width0.265 INCHES NOMINAL IN
bore_styleW/ KEYWAY BOTH ENDS
body_height0.188 INCHES NOMINAL IN
body_length0.875 INCHES NOMINAL IN
helix_angle23.0000 DEGREES
constructionREGULAR
overall_width0.310 INCHES NOMINAL IN
accessory_typeINNER TUBE
base_thickness0.250 INCHES IN
overall_height0.200 INCHES NOMINAL IN
NSN5330-00-163-6928
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 76-016 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 3.187 INCHES NOMINAL IN
•
APERTURE DIAMETER: 3.016 INCHES MINIMUM AND 3.046 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: +642-7 FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL OVERALL
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.125 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER3.187 INCHES NOMINAL IN
APERTURE DIAMETER3.016 INCHES MINIMUM AND 3.046 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION+642-7 FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORCIRCULAR
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
6.50-16Interchangeable
interchangeable cross-reference
interchangeable
519251Interchangeable
interchangeable cross-reference
interchangeable
GP2/7.60/6.50-16/TR15/OFF CENTERInterchangeable
interchangeable cross-reference
interchangeable
519280Interchangeable
interchangeable cross-reference
interchangeable
7.60/6.50-16Interchangeable
interchangeable cross-reference
interchangeable
7.60-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 76-016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 76-016?
76-016 is a MICROCIRCUIT,DIGITAL.
What parts can replace 76-016?
There are 11 known substitutes for 76-016: 6.50-16, 519251, GP2/7.60/6.50-16/TR15/OFF CENTER and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 76-016?
76-016 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-163-6928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 76-016

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026