PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 75Y10146
75Y10146 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: SQUARE, seal_width: 0.625 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, housing_bore_diameter: 6.007 INCHES NOMINAL IN, sealing_element_style: ANGULAR-OPPOSED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-614-8592, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75Y10146
NSN: 5330-00-614-8592
FSC: 5330
CAGE: 556A6 — LINDE MATERIAL HANDLING NORTH AMERICA CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT B
case_styleSQUARE
seal_width0.625 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
housing_bore_diameter6.007 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
end_item_identificationSHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE); CARGO SYSTEM, 463L; SUPPLY CLASS AOE
accommodated_shaft_diameter5.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-614-8592
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 75Y10146 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT A
•
SEAL WIDTH: 0.625 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 5.000 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 6.007 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
MATERIALSTEEL CASE
SEAL WIDTH0.625 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR-OPPOSED
END ITEM IDENTIFICATIONSHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE); CARGO SYSTEM, 463L; SUPPLY CLASS AOE
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER5.000 INCHES NOMINAL IN
HOUSING BORE DIAMETER6.007 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
41527-1Interchangeable
interchangeable cross-reference
interchangeable
1EN1-SInterchangeable
interchangeable cross-reference
interchangeable
633298-01Interchangeable
interchangeable cross-reference
interchangeable
103134Interchangeable
interchangeable cross-reference
interchangeable
0-14997Interchangeable
interchangeable cross-reference
interchangeable
TSX310Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 75Y10146?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75Y10146?
75Y10146 is a SEAL,PLAIN ENCASED.
What parts can replace 75Y10146?
There are 14 known substitutes for 75Y10146: 41527-1, 1EN1-S, 633298-01 and 11 more. Substitute compatibility should be verified for your specific system.
Is 75Y10146 still available?
75Y10146 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75Y10146

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026