PartsTable
Technical Data Sheet
Download PDF

75S-0375S-0030 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

75S-0375S-0030: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include special_features: OPEN CYLINDER WALLS WITH INWARD BENT PROTRUSIONS FOR PACKING MATERIAL, features_provided: NONMAGNETIC, end_item_identification: DESUPERHEATER, part_name_assigned_by_controlling_agency: PALL RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-661-0305, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75S-0375S-0030
NSN: 5330-01-661-0305
FSC: 5330 — Packing and Gasket Materials
CAGE: 0E3N0 — SCHUTTE & KOERTING ACQUISITION COMPANY DIV SCHUTTE & KOERTING ACQUITISION COMPANY (USA)
SPECIFICATIONS
special_featuresOPEN CYLINDER WALLS WITH INWARD BENT PROTRUSIONS FOR PACKING MATERIAL
features_providedNONMAGNETIC
end_item_identificationDESUPERHEATER
part_name_assigned_by_controlling_agencyPALL RING
NSN5330-01-661-0305
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 75S-0375S-0030 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: NONMAGNETIC
TECHNICAL CHARACTERISTICS
FEATURES PROVIDEDNONMAGNETIC
SPECIAL FEATURESOPEN CYLINDER WALLS WITH INWARD BENT PROTRUSIONS FOR PACKING MATERIAL
PART NAME ASSIGNED BY CONTROLLING AGENCYPALL RING
END ITEM IDENTIFICATIONDESUPERHEATER
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
003-X023S REV 0 MARK NO 12Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 75S-0375S-0030?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75S-0375S-0030?
75S-0375S-0030 is a RETAINER,PACKING.
What parts can replace 75S-0375S-0030?
There is 1 known substitute for 75S-0375S-0030: 003-X023S REV 0 MARK NO 12. Substitute compatibility should be verified for your specific system.
What is the NSN for 75S-0375S-0030?
75S-0375S-0030 is cataloged in the U.S. Government catalog under NSN 5330-01-661-0305. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75S-0375S-0030