PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 75G
75G ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The PUNCH,DRIVE PIN is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, coil_quantity: 9-3/4, inside_diameter: 0.625 INCHES NOMINAL IN, style_designator: CYLINDRICAL, surface_treatment: ZINC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5210-00-189-9529, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75G
NSN: 5210-00-189-9529
FSC: 5210
CAGE: 70408 — AT AND T CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity9-3/4
inside_diameter0.625 INCHES NOMINAL IN
style_designatorCYLINDRICAL
surface_treatmentZINC OVERALL
spring_free_length2.000 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_deflection_rate90.000 POUNDS PER INCH NOMINAL LBS
spring_free_outside_diameter0.865 INCHES NOMINAL IN
material_document_and_classificationJAN-S-1160,GRADE 1,TYPE A-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5210-00-189-9529
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available PUNCH,DRIVE PIN TITLE COMPONENT PN 75G MFR PUNCH,DRIVE PIN
KEY FEATURES
•
THICKNESS: 0.0120 INCHES IN
•
SHAPE: STRAIGHT
•
END HOLE: INCLUDED
•
MEASUREMENT SYSTEM: ENGLISH
•
HOLDER: NOT INCLUDED
•
LENGTH: 1.344 INCHES NOMINAL IN
•
END SHAPE AND LOCATION: ROUND FIRST END AND SQUARE SECOND END
•
WIDTH: 0.313 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.0120 INCHES IN
SHAPESTRAIGHT
END HOLEINCLUDED
MEASUREMENT SYSTEMENGLISH
HOLDERNOT INCLUDED
LENGTH1.344 INCHES NOMINAL IN
END SHAPE AND LOCATIONROUND FIRST END AND SQUARE SECOND END
WIDTH0.313 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
41P3606Interchangeable
interchangeable cross-reference
interchangeable
00336Interchangeable
interchangeable cross-reference
interchangeable
565GInterchangeable
interchangeable cross-reference
interchangeable
8087PC19Interchangeable
interchangeable cross-reference
interchangeable
8503REVAPC13-35T044Interchangeable
interchangeable cross-reference
interchangeable
04746-75G-375Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 75G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75G?
75G is a PUNCH,DRIVE PIN.
What parts can replace 75G?
There are 6 known substitutes for 75G: 41P3606, 00336, 565G and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 75G?
75G is cataloged in the Federal Logistics Information System (FLIS) under NSN 5210-00-189-9529. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75G

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026