PartsTable
Technical Data Sheet
Download PDF

75FP4-832 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

75FP4-832: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: ALUMINUM OVERALL, nut_height: 0.370 INCHES NOMINAL IN, pilot_length: 0.125 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, pilot_diameter: 0.274 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-015-3048, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75FP4-832
NSN: 5310-00-015-3048
FSC: 5310 — Nuts and Washers
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialALUMINUM OVERALL
nut_height0.370 INCHES NOMINAL IN
pilot_length0.125 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
pilot_diameter0.274 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_across_flats0.375 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES IN
thread_quantity_per_inch28
NSN5310-00-015-3048
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 75FP4-832 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
PILOT DIAMETER: 0.274 INCHES NOMINAL IN
•
PILOT LENGTH: 0.125 INCHES NOMINAL IN
•
NUT HEIGHT: 0.370 INCHES NOMINAL IN
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.375 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
PILOT DIAMETER0.274 INCHES NOMINAL IN
PILOT LENGTH0.125 INCHES NOMINAL IN
NUT HEIGHT0.370 INCHES NOMINAL IN
THREAD CLASS2B
THREAD QUANTITY PER INCH28
MATERIALALUMINUM OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 75FP4-832?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75FP4-832?
75FP4-832 is a NUT,PLAIN,CLINCH.
What is the NSN for 75FP4-832?
75FP4-832 is cataloged in the U.S. Government catalog under NSN 5310-00-015-3048. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75FP4-832

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.