PartsTable
Technical Data Sheet
Download PDF

75F6058 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

75F6058: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT CHAMFER, head_height: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.680 INCHES NOMINAL IN, thread_length: 0.406 INCHES MINIMUM IN, screw_material: STEEL COMP 4140 OR STEEL COMP 8640 OR STEEL COMP 8740 OR STEEL COMP 1050. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-515-2938, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75F6058
NSN: 5305-00-515-2938
FSC: 5305 — Screws
CAGE: F5322 — GIAT INDUSTRIES CENTRE DE TULLE (FRA)
SPECIFICATIONS
head_styleFLAT CHAMFER
head_height0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.680 INCHES NOMINAL IN
thread_length0.406 INCHES MINIMUM IN
screw_materialSTEEL COMP 4140 OR STEEL COMP 8640 OR STEEL COMP 8740 OR STEEL COMP 1050
fastener_length0.875 INCHES NOMINAL IN
hardness_rating30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
special_featuresSLOT 0.094 IN. W BY 0.062 IN. DEEP ON THREAD END IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.500 INCHES IN
NSN5305-00-515-2938
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 75F6058 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PHOSPHATE
•
FASTENER LENGTH: 0.875 INCHES NOMINAL IN
•
THREAD LENGTH: 0.406 INCHES MINIMUM IN
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPHOSPHATE
FASTENER LENGTH0.875 INCHES NOMINAL IN
THREAD LENGTH0.406 INCHES MINIMUM IN
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 4140 OR STEEL COMP 8640 OR STEEL COMP 8740 OR STEEL COMP 1050
SPECIAL FEATURESSLOT 0.094 IN. W BY 0.062 IN. DEEP ON THREAD END IN
SUBSTITUTES & CROSS-REFERENCES 8
A20178Reference document
Same NSN cross-reference
Reference document — Secondary reference
5152938Reference document
Same NSN cross-reference
Reference document — Secondary reference
5305PL1648868Reference document
Same NSN cross-reference
Reference document — Informative reference only
5305005152938Reference document
Same NSN cross-reference
Reference document — Informative reference only
A10192Reference document
Same NSN cross-reference
Reference document — Secondary reference
5305-515-2938Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 75F6058?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75F6058?
75F6058 is a SCREW,MACHINE.
What parts can replace 75F6058?
There are 8 known substitutes for 75F6058: A20178, 5152938, 5305PL1648868 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 75F6058?
75F6058 is cataloged in the U.S. Government catalog under NSN 5305-00-515-2938. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75F6058