PartsTable
Technical Data Sheet
Download PDF

75F4035 — 75F4035

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

75F4035: 75F4035.

The 75F4035 is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 0.160 INCHES NOMINAL IN, mechanism_held: HAMMER, overall_length: 1.572 INCHES NOMINAL IN, surface_treatment: PHOSPHATE MANGANESE, end_item_identification: MACHINE GUN,CAL. .50 (M2); NSN 1005-00-322-9715.

This part is cataloged in the U.S. Government catalog under NSN 1005-00-535-1220, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75F4035
NSN: 1005-00-535-1220
FSC: 1005 — Guns, Through 30mm
CAGE: F5322 — GIAT INDUSTRIES CENTRE DE TULLE (FRA)
SPECIFICATIONS
materialSTEEL
overall_width0.160 INCHES NOMINAL IN
mechanism_heldHAMMER
overall_length1.572 INCHES NOMINAL IN
special_featuresHEAT TREATMENT:FOR 6150-HEAT AT 1550 TO 1600 DEGREES F AND FOR 4340- HEAT AT 1500 TO 1550 DEGREES F;OIL QUENCH;TEMPER ONE HOUR;0.358 IN.H IN
surface_treatmentPHOSPHATE MANGANESE
end_item_identificationMACHINE GUN,CAL. .50 (M2); NSN 1005-00-322-9715
metallic_hardness_rating45.0 MINIMUM ROCKWELL C AND 51.0 MAXIMUM ROCKWELL C
NSN1005-00-535-1220
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available 75F4035 TITLE COMPONENT PN 75F4035 MFR 75F4035
KEY FEATURES
•
MECHANISM HELD: HAMMER
•
SURFACE TREATMENT: PHOSPHATE MANGANESE
•
MATERIAL: STEEL
•
METALLIC HARDNESS RATING: 45.0 MINIMUM ROCKWELL C AND 51.0 MAXIMUM ROCKWELL C
TECHNICAL CHARACTERISTICS
MECHANISM HELDHAMMER
OVERALL LENGTH1.572 INCHES NOMINAL IN
OVERALL WIDTH0.160 INCHES NOMINAL IN
SPECIAL FEATURESHEAT TREATMENT:FOR 6150-HEAT AT 1550 TO 1600 DEGREES F AND FOR 4340- HEAT AT 1500 TO 1550 DEGREES F;OIL QUENCH;TEMPER ONE HOUR;0.358 IN.H IN
SURFACE TREATMENTPHOSPHATE MANGANESE
END ITEM IDENTIFICATIONMACHINE GUN,CAL. .50 (M2); NSN 1005-00-322-9715
MATERIALSTEEL
METALLIC HARDNESS RATING45.0 MINIMUM ROCKWELL C AND 51.0 MAXIMUM ROCKWELL C
OTHER ITEMS IN FSC 1005 — Guns, Through 30mm
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
1005-00-000-0061 1005-00-001-2676 1005-00-001-5589 1005-00-002-0996 1005-00-003-1073 1005-00-003-2251 1005-00-003-2267 1005-00-003-2268
SUBSTITUTES & CROSS-REFERENCES 8
10089851Reference document
Same NSN cross-reference
Reference document — Informative reference only
366-200-5010Reference document
Same NSN cross-reference
Reference document — Informative reference only
711662808701Reference document
Same NSN cross-reference
Reference document — Informative reference only
1005005351220Reference document
Same NSN cross-reference
Reference document — Informative reference only
1005PL1646949Reference document
Same NSN cross-reference
Reference document — Informative reference only
1005PL0901422Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — mutilation + specific procedure
Ready to buy 75F4035?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75F4035?
75F4035 is a 75F4035.
What parts can replace 75F4035?
There are 8 known substitutes for 75F4035: 10089851, 366-200-5010, 711662808701 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 75F4035?
75F4035 is cataloged in the U.S. Government catalog under NSN 1005-00-535-1220. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75F4035