PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 75F3001
75F3001 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN, diameter: 0.091 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT FILLISTER, surface_finish: 125.0 MICROINCHES OVERALL, hardness_rating: 48.0 ROCKWELL D MINIMUM AND 53.0 ROCKWELL D MAXIMUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-515-2898, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75F3001
NSN: 5315-00-515-2898
FSC: 5315
CAGE: F5322 — GIAT INDUSTRIES CENTRE DE TULLE (FRA)
SPECIFICATIONS
height0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
diameter0.091 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT FILLISTER
surface_finish125.0 MICROINCHES OVERALL
hardness_rating48.0 ROCKWELL D MINIMUM AND 53.0 ROCKWELL D MAXIMUM OVERALL
style_designatorSTRAIGHT
pin_head_diameter0.112 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN
surface_treatmentPHOSPHATE OVERALL
under_head_length0.196 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
NSN5315-00-515-2898
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 75F3001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.091 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 0.196 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
SURFACE TREATMENT: PHOSPHATE OVERALL
•
MATERIAL: STEEL OVERALL
•
PIN HEAD DIAMETER: 0.112 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
HEAD STYLE: FLAT FILLISTER
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.091 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
UNDER HEAD LENGTH0.196 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
SURFACE FINISH125.0 MICROINCHES OVERALL
SURFACE TREATMENTPHOSPHATE OVERALL
MATERIALSTEEL OVERALL
PIN HEAD DIAMETER0.112 INCHES MINIMUM AND 0.117 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
HEAD STYLEFLAT FILLISTER
HARDNESS RATING48.0 ROCKWELL D MINIMUM AND 53.0 ROCKWELL D MAXIMUM OVERALL
HEIGHT0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
34B23Interchangeable
interchangeable cross-reference
interchangeable
A10336Interchangeable
interchangeable cross-reference
interchangeable
7377757Interchangeable
interchangeable cross-reference
interchangeable
636B-3-1/4-1Interchangeable
interchangeable cross-reference
interchangeable
00201-0103-01Interchangeable
interchangeable cross-reference
interchangeable
5315PL1646970Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 75F3001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75F3001?
75F3001 is a PIN,STRAIGHT,HEADED.
What parts can replace 75F3001?
There are 8 known substitutes for 75F3001: 34B23, A10336, 7377757 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 75F3001?
75F3001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-515-2898. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75F3001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026