PartsTable
Technical Data Sheet
Download PDF

75D751041-2005 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

75D751041-2005: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.560 INCHES NOMINAL IN, fork_depth: 1.255 INCHES NOMINAL IN, hole_diameter: 0.386 INCHES MINIMUM AND 0.393 INCHES MAXIMUM IN, overall_width: 0.750 INCHES NOMINAL IN, overall_height: 1.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-213-4567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75D751041-2005
NSN: 5340-01-213-4567
FSC: 5340 — Hardware, Commercial
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.560 INCHES NOMINAL IN
fork_depth1.255 INCHES NOMINAL IN
hole_diameter0.386 INCHES MINIMUM AND 0.393 INCHES MAXIMUM IN
overall_width0.750 INCHES NOMINAL IN
overall_height1.750 INCHES NOMINAL IN
fork_span_width0.500 INCHES NOMINAL IN
surface_treatmentPAINT AND PRIMER OVERALL
fork_arm_thickness0.125 INCHES NOMINAL IN
distance_from_pivot_pinhole_center_to_rod_connection_end1.380 INCHES NOMINAL IN
NSN5340-01-213-4567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 75D751041-2005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.500 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.125 INCHES NOMINAL IN
•
END RADIUS: 0.560 INCHES NOMINAL IN
•
SURFACE TREATMENT: PAINT AND PRIMER OVERALL
•
MATERIAL: STEEL OVERALL
•
FORK DEPTH: 1.255 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.750 INCHES NOMINAL IN
FORK SPAN WIDTH0.500 INCHES NOMINAL IN
FORK ARM THICKNESS0.125 INCHES NOMINAL IN
END RADIUS0.560 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
SURFACE TREATMENTPAINT AND PRIMER OVERALL
MATERIALSTEEL OVERALL
FORK DEPTH1.255 INCHES NOMINAL IN
HOLE DIAMETER0.386 INCHES MINIMUM AND 0.393 INCHES MAXIMUM IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END1.380 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 75D751041-2005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75D751041-2005?
75D751041-2005 is a CLEVIS,ROD END.
What is the NSN for 75D751041-2005?
75D751041-2005 is cataloged in the U.S. Government catalog under NSN 5340-01-213-4567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75D751041-2005

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.