PartsTable
Technical Data Sheet
Download PDF

75D131007-2001 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

75D131007-2001: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, nut_style: SLEEVE, nut_length: 0.875 INCHES NOMINAL IN, nut_diameter: 1.000 INCHES NOMINAL IN, thread_class: 2B, thread_series: ACME. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-352-2084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75D131007-2001
NSN: 5310-01-352-2084
FSC: 5310 — Nuts and Washers
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
nut_styleSLEEVE
nut_length0.875 INCHES NOMINAL IN
nut_diameter1.000 INCHES NOMINAL IN
thread_class2B
thread_seriesACME
flange_diameter2.400 INCHES MINIMUM AND 2.600 INCHES MAXIMUM IN
flange_thickness0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
special_featuresFOUR HOLES EQUALLY SPACED ON 1.800 DIA; EACH HOLE WITH A DIA OF 0.218 INCHES MIN AND 0.224 INCHES MAX IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.625 INCHES IN
NSN5310-01-352-2084
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 75D131007-2001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 2.400 INCHES MINIMUM AND 2.600 INCHES MAXIMUM IN
•
NUT LENGTH: 0.875 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
THREAD SERIES: ACME
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
•
NUT DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER2.400 INCHES MINIMUM AND 2.600 INCHES MAXIMUM IN
NUT LENGTH0.875 INCHES NOMINAL IN
FLANGE THICKNESS0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
THREAD SERIESACME
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
NUT DIAMETER1.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND NUT
SPECIAL FEATURESFOUR HOLES EQUALLY SPACED ON 1.800 DIA; EACH HOLE WITH A DIA OF 0.218 INCHES MIN AND 0.224 INCHES MAX IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 75D131007-2001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75D131007-2001?
75D131007-2001 is a NUT,SLEEVE.
What is the NSN for 75D131007-2001?
75D131007-2001 is cataloged in the U.S. Government catalog under NSN 5310-01-352-2084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75D131007-2001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.