PartsTable
Technical Data Sheet
Download PDF

75A697355-1001 — CLAMP,BLOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

75A697355-1001: CLAMP,BLOCK.

The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include block_height: 0.800 INCHES NOMINAL0.800 INCHES NOMINAL IN, overall_width: 0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN, overall_height: 1.800 INCHES NOMINAL1.800 INCHES NOMINAL IN, overall_length: 2.120 INCHES NOMINAL2.120 INCHES NOMINAL IN, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S)UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-370-0103, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75A697355-1001
NSN: 5340-01-370-0103
FSC: 5340 — Hardware, Commercial
CAGE: K0289 — BRITISH AEROSPACE (MILITARY AIRCRAFT & AEROSTRUCTURES) (GBR)
SPECIFICATIONS
block_height0.800 INCHES NOMINAL0.800 INCHES NOMINAL IN
overall_width0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN
overall_height1.800 INCHES NOMINAL1.800 INCHES NOMINAL IN
overall_length2.120 INCHES NOMINAL2.120 INCHES NOMINAL IN
style_designatorRECTANGULAR
mounting_facilityUNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter1.080 INCHES MINIMUM AND 1.085 INCHES MAXIMUM SINGLE HOLE IN
clamping_hole_quantity11
mounting_hole_diameter5.0 MILLIMETERS NOMINAL5.0 MILLIMETERS NOMINAL MM
mounting_hole_quantity22
distance_from_end_to_first_clamping_hole_center1.060 INCHES NOMINAL IN
distance_from_end_to_first_mounting_hole_center0.250 INCHES NOMINAL IN
NSN5340-01-370-0103
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 75A697355-1001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 22
•
CLAMPING HOLE QUANTITY: 11
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 1.060 INCHES NOMINAL IN
•
BLOCK HEIGHT: 0.800 INCHES NOMINAL0.800 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MOUNTING HOLE DIAMETER: 5.0 MILLIMETERS NOMINAL5.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY22
OVERALL HEIGHT1.800 INCHES NOMINAL1.800 INCHES NOMINAL IN
CLAMPING HOLE QUANTITY11
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER1.060 INCHES NOMINAL IN
BLOCK HEIGHT0.800 INCHES NOMINAL0.800 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR
MOUNTING HOLE DIAMETER5.0 MILLIMETERS NOMINAL5.0 MILLIMETERS NOMINAL MM
OVERALL LENGTH2.120 INCHES NOMINAL2.120 INCHES NOMINAL IN
OVERALL WIDTH0.380 INCHES NOMINAL0.380 INCHES NOMINAL IN
CLAMPING HOLE DIAMETER1.080 INCHES MINIMUM AND 1.085 INCHES MAXIMUM SINGLE HOLE IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 75A697355-1001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75A697355-1001?
75A697355-1001 is a CLAMP,BLOCK.
What is the NSN for 75A697355-1001?
75A697355-1001 is cataloged in the U.S. Government catalog under NSN 5340-01-370-0103. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75A697355-1001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.