75A500803-2001 — CLAMP,BLOCK,SECTION

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

75A500803-2001: CLAMP,BLOCK,SECTION.

The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: PLASTIC, block_height: 0.900 INCHES NOMINAL0.900 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN, overall_length: 4.300 INCHES NOMINAL4.300 INCHES NOMINAL IN, special_features: ADDITIONAL HOLE,0.195 IN. MIN 0.202 IN.

MAX DIA IN, mounting_facility: UNTHREADED HOLE(S)UNTHREADED HOLE(S). This part is cataloged in the U.S. Government catalog under NSN 5340-01-193-4583, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

75A500803-2001

NSN: 5340-01-193-4583
FSC: 5340 — Hardware, Commercial
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)

SPECIFICATIONS

material	PLASTIC
block_height	0.900 INCHES NOMINAL0.900 INCHES NOMINAL IN
overall_width	0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN
overall_length	4.300 INCHES NOMINAL4.300 INCHES NOMINAL IN
special_features	ADDITIONAL HOLE,0.195 IN. MIN 0.202 IN. MAX DIA IN
mounting_facility	UNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter	0.750 INCHES MINIMUM AND 0.754 INCHES MAXIMUM THIRD HOLE IN
clamping_hole_quantity	33
mounting_hole_diameter	0.195 INCHES MINIMUM AND 0.195 INCHES MINIMUM AND 0.202 INCHES MAXIMUM0.202 INCHES MAXIMUM IN
mounting_hole_quantity	22
distance_from_end_to_first_clamping_hole_center	0.418 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
distance_from_end_to_first_mounting_hole_center	0.890 INCHES NOMINAL IN
NSN	5340-01-193-4583

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING HOLE QUANTITY: 22

•

CLAMPING HOLE QUANTITY: 33

•

DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.418 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN

•

BLOCK HEIGHT: 0.900 INCHES NOMINAL0.900 INCHES NOMINAL IN

•

MOUNTING HOLE DIAMETER: 0.195 INCHES MINIMUM AND 0.195 INCHES MINIMUM AND 0.202 INCHES MAXIMUM0.202 INCHES MAXIMUM IN

•

CLAMPING HOLE DIAMETER: 0.250 INCHES MINIMUM AND 0.254 INCHES MAXIMUM FIRST HOLE IN

TECHNICAL CHARACTERISTICS

MOUNTING HOLE QUANTITY	22
CLAMPING HOLE QUANTITY	33
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER	0.418 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN
BLOCK HEIGHT	0.900 INCHES NOMINAL0.900 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER	0.195 INCHES MINIMUM AND 0.195 INCHES MINIMUM AND 0.202 INCHES MAXIMUM0.202 INCHES MAXIMUM IN
OVERALL LENGTH	4.300 INCHES NOMINAL4.300 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL0.500 INCHES NOMINAL IN
CLAMPING HOLE DIAMETER	0.250 INCHES MINIMUM AND 0.254 INCHES MAXIMUM FIRST HOLE IN
CLAMPING HOLE DIAMETER	0.500 INCHES MINIMUM AND 0.504 INCHES MAXIMUM SECOND HOLE IN
CLAMPING HOLE DIAMETER	0.750 INCHES MINIMUM AND 0.754 INCHES MAXIMUM THIRD HOLE IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 75A500803-2001?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 75A500803-2001?

75A500803-2001 is a CLAMP,BLOCK,SECTION.

What is the NSN for 75A500803-2001?

75A500803-2001 is cataloged in the U.S. Government catalog under NSN 5340-01-193-4583. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

75A500803-2001 — CLAMP,BLOCK,SECTION

Request a Quote — 75A500803-2001