PartsTable
Technical Data Sheet
Download PDF

75995 — BOLT,MACHINE

✓ Government record, cited
Hama · BOLT SCREW
PRODUCT OVERVIEW

75995: BOLT,MACHINE.

- Handmade, stylish bugatti mobile phone case made of fine calf leather - Leather-covered belt clip - Belt loop Equipment: - Padded inside lining with bugatti imprint. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.000 INCHES MAXIMUM IN, fastener_length: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-271-2279, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75995
NSN: 5306-00-271-2279
FSC: 5306 — Bolts
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
thread_class2A A
thread_length1.000 INCHES MAXIMUM IN
fastener_length1.000 INCHES NOMINAL IN
hardness_rating23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
surface_treatmentZINC OVERALL
width_between_flats0.544 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
nominal_thread_diameter0.375 INCHES IN
NSN5306-00-271-2279
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 75995 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
THREAD LENGTH: 1.000 INCHES MAXIMUM IN
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
FASTENER LENGTH1.000 INCHES NOMINAL IN
THREAD LENGTH1.000 INCHES MAXIMUM IN
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.544 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 5 GRADE
SUBSTITUTES & CROSS-REFERENCES 9
145-4510932-25Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
MX-261193-3 PIECE 29Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
SP75995Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-1222JTYPE1GRADE5Reference document
Same NSN cross-reference
Reference document — Identification reference
377579Reference document
Same NSN cross-reference
Reference document — Secondary reference
43B70118-7360Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 75995?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75995?
75995 is a BOLT,MACHINE manufactured by Hama.
What parts can replace 75995?
There are 9 known substitutes for 75995: 145-4510932-25, MX-261193-3 PIECE 29, SP75995 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 75995?
75995 is cataloged in the U.S. Government catalog under NSN 5306-00-271-2279. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75995

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.