PartsTable
Technical Data Sheet
Download PDF

7598747 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7598747: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OVERALL, first_end_style: CHAMFERED, hardness_rating: 26.0 ROCKWELL C NOMINAL OVERALL, second_end_style: POINTED, pin_overall_length: 1.879 INCHES MINIMUM AND 1.889 INCHES MAXIMUM IN, first_hole_diameter: 0.126 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-759-8747, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7598747
NSN: 5315-00-759-8747
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
first_end_styleCHAMFERED
hardness_rating26.0 ROCKWELL C NOMINAL OVERALL
second_end_stylePOINTED
pin_overall_length1.879 INCHES MINIMUM AND 1.889 INCHES MAXIMUM IN
first_hole_diameter0.126 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
pin_overall_diameter0.2491 INCHES MINIMUM AND 0.2496 INCHES MAXIMUM IN
first_end_taper_angle44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
first_end_taper_length0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
second_end_taper_angle89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM
second_end_taper_length0.125 INCHES NOMINAL IN
NSN5315-00-759-8747
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7598747 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
•
SECOND END TAPER ANGLE: 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.126 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
HARDNESS RATING: 26.0 ROCKWELL C NOMINAL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SECOND END TAPER LENGTH: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
SECOND END TAPER ANGLE89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.126 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
HARDNESS RATING26.0 ROCKWELL C NOMINAL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SECOND END TAPER LENGTH0.125 INCHES NOMINAL IN
FIRST END TAPER ANGLE44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.2491 INCHES MINIMUM AND 0.2496 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
BA92937Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7598747?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7598747?
7598747 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 7598747?
There is 1 known substitute for 7598747: BA92937. Substitute compatibility should be verified for your specific system.
What is the NSN for 7598747?
7598747 is cataloged in the U.S. Government catalog under NSN 5315-00-759-8747. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7598747

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.